Challis Ag+ Naturally Pure, Environmentally Friendly Anti Microbial Tool Disinfectant
Decontaminating hands with antimicrobial wipes or hand washes between wards is a well-established protocol that has been undeniably a very effective measure in improving infection control. However, the decontamination of tradesman tools as they transfer and work between wards is often overlooked and the level of risk often under-considered, within some case no protocols in place at all.
Imagine the risk involved in a tradesman working in high bacterial load areas such as toilets or bathrooms then moving to work repairing a basin tap on a high dependency ward. Protocols are undoubtedly in place regarding decontamination of hands but often the decontamination of tools are completely overlooked and yet present the highest risk of all.
A simple and effective solution is now available from Challis Ag+ in the form of Challis Ag+ Tool disinfectant and area decontamination spray inconvenient and easy to use 500ml & 1.0-litre spray bottles. Naturally Pure, environmentally friendly Challis Ag+ Tool disinfectant gives complete broad-spectrum Anti Microbial control solution for rapid and safe disinfection of fittings, pipe sections, working equipment, tools and surfaces
One application over tools, fittings or surfaces between transfers will quickly, safely and completely decontaminate. Ensuring that no areas of work are bacterially compromised and maintaining the high level of infection control required and expected. Providing your patients with a safe, clean, risk-free environment.
Challis Tool Disinfectant Available in 500ml & 1.0 Litre Spray Bottles info@challisms.com
To Order Tele: 01628 529024
The original and most advanced silver stabilised hydrogen peroxide.
Challis Ag+ Tool Disinfectant is a powerful, highly effective, broad-spectrum disinfectant bactericide, virucide, sporicide, fungicide, algaecide and amoebicide, that is both stable and safe.
Challis Ag+ Tool Disinfectant is a unique solution of Hydrogen Peroxide (H2O2) which is stabilised using a proprietary ionic silver-based chemistry
When correctly applied to water, air or any surface, Challis Ag+ Tool Disinfectant will disinfect through an oxidisation process and continue to safely provide unrivalled residual performance.
Challis Ag+ Tool Disinfectant is chlorine and alcohol-free, with no corrosive effects on usual materials of construction during application. After use, it simply degrades into harmless water and oxygen as one of the safest forms of disinfection.
Key Benefits
- Highly effective biofilm remover.
- Highly effective bactericide, virucide, sporicide, fungicide, algaecide and amoebicide.
- Cost-effective easy to apply
- Reduced HAI’s
- Conforms to EN13623 and EN13626.
- Unrivalled stability.
- Forms no harmful by-products.
- Non-toxic & pH neutral when dosed.
- Proven efficacy & globally approved.
- Effective between 0°C and 95°C.
- Odour, colour and taste-free.
- Three-year shelf-life.
- NSF ANSI/CAN 60 Certified
- DEFRA Approved Disinfectant
Challis Ag+ Shower Fitting and Cross-Contamination Prevention Protocol
Effective cleaning and disinfection of medical equipment, surfaces and equipment such as showers are critical in a healthcare environment as inadequate treatment and lack of attention to standard operating procedures can cause cross-contamination. With this in mind, Challis Ag+ have developed our shower installation protocol.
Protocol
- The operator ensures hands are decontaminated with appropriate hand-washer or replace gloves
- Tools decontaminated using Challis Ag+ Tool Disinfectant. Special attention to this during ward transfer.
- Excess Challis Ag+ Tool disinfectant wipe off with a clean paper towel.
- Old shower hose unscrewed from shower outlet, remove old washers and place all in Challis Ag+ returns box.
- New shower & hose c/w new rubber washers presented and screwed on to shower mixer outlet. Do not overtighten.
- Spray new shower and hose with Challis Ag+ Tool disinfectant ensuring full coverage of shower head, hose and fittings.
- Excess Challis Ag+ Tool disinfectant wipe off with a clean paper towel.
- New shower & hose turned on and tested for fault-free functionality and safe temperature.